Series E/F - Stainless steel gear flange pumps
The gear flange pumps of the Series E/F are designed as stainless steel flange pumps with housing and gears made of material 1.4571 (V4A).
The pumps are suitable for corrosive and chemically demanding media for which a gray cast iron design is not sufficiently resistant.
Series E/F1
Medium: Hydraulic oil 35 mm²/s @ 50 °C
| Type | cm³/rev | Qmax (l/min) | pmax (bar) |
|---|---|---|---|
| E/F 1-06 | 0,43 | 0,60 | 20 |
| E/F 15 | 0,85 | 1,15 | 20 |
| E/F 17 | 1,20 | 1,60 | 20 |
| E/F 110 | 1,80 | 2,30 | 20 |
Q values based on n = 1450 min-¹. Maximum pressure depends on the available motor power.
Series E/F2
Medium: Hydraulic oil 35 mm²/s @ 50 °C
| Type | cm³/rev | Qmax (l/min) | pmax (bar) |
|---|---|---|---|
| E/F 210 | 2,30 | 3,00 | 20 |
| E/F 214 | 3,20 | 4,50 | 20 |
| E/F 219 | 4,30 | 6,00 | 20 |
Q values based on n = 1450 min-¹. Maximum pressure depends on the available motor power.
Series E/F3
Medium: Hydraulic oil 35 mm²/s @ 50 °C
| Type | cm³/rev | Qmax (l/min) | pmax (bar) |
|---|---|---|---|
| E/F 310 | 5,10 | 7,40 | 20 |
| E/F 314 | 7,10 | 10,20 | 20 |
| E/F 318 | 9,10 | 13,20 | 20 |
| E/F 323 | 11,70 | 16,70 | 20 |
| E/F 328 | 14,10 | 20,30 | 20 |
| E/F 333 | 16,70 | 24,10 | 20 |
Q values based on n = 1450 min-¹. Maximum pressure depends on the available motor power.
Downloads
Data sheet (incl. characteristic curves)
